Injection Pump: Removal
- Open hood. Disconnect battery ground cables from both batteries. Remove engine oil filler neck. Remove bolts attaching injection pump to drive gear. Disconnect electrical connectors from injection pump. Disconnect accelerator cable and cruise control cable from throttle lever.
- Remove air cleaner and cover air intake. Remove accelerator cable bracket, with cables attached, and position out of the way. Remove fuel line from injection pump inlet and cap both fittings. Remove and cap injection pump fitting adapter.
- Remove fuel return line from injection pump, rotate out of the way and cap both fittings. Loosen injector line fittings at the pump. Disconnect injector lines in following sequence; 5,6,4,8,3,1,7,2 from injector pump nozzles and cap all fittings. See Figure .
- Remove 3 injection pump retaining nuts. If injection pump is to be replaced, remove injector lines from pump and cap all fittings. Remove injection pump from engine compartment.