LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1984 >> Cutaway 6.9 1 >> Repair and Diagnosis >> Engine Performance >> Adjustment >> Tune-Up - V8 >> Adjustments >> Ignition Timing

Ignition Timing

NOTE: Magnetic probe timing device may be used if instrument is available and engine is so equipped. Timing probe offset is 135° ATDC.
  1. Determine specified timing and mark degree line on damper (some vehicles mark both pointer and damper notch). Disconnect vacuum line(s) at distributor and plug line(s).
  2. Connect tachometer. Connect timing light to No. 1 spark plug wire. If vehicle is equipped with barometric sensor, disconnect sensor from module. Connect Black and Yellow wires in module connector. Set timing to specifications.
Fig 1: 5.8L Timing Mark & Firing Order (Magnetic Probe Is Located At 135 Deg. ATDC)
G202051
TIMING SPECIFICATIONS (DEGREES BTDC @ RPM)

Application Man. Trans. Auto. Trans.
5.0L
Calif. (1) (1)
High Altitude 12 @ 800 12 @ 800
All Other Models 8 @ 800 8 @ 800
5.8L
Calif. (1) (1)
Federal
Light Duty (1) (1)
Heavy Duty 8 @ 800 8 @ 800
7.5L
Calif. 6 @ 800 6 @ 800
All Other Models 8 @ 800 8 @ 800
(1) Calif. 5.0L and all Light Duty 5.8L engine are equipped with Electronic Engine Control (EEC IV) system. Ignition timing is not a normal adjustment.