LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1982 >> Courier 2.3L Eng VIN 2, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Evaporative Emissions System >> Testing >> THERMO Valve

THERMO Valve

  1. Remove thermo valve and attach sections of hose to inlet and outlet ports of valve. Submerge valve in water-filled container leaving hose ends out of container.
  2. Heat water gradually to 140°F (60°C) for models equipped with 2.0L engine, or 150°F (65°C) for models with 2.3L engine. Blow air into inlet hose. If air flows from outlet hose, valve is functioning properly.