LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1982 >> Courier 2.3L Eng VIN 2, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Power Mirrors >> Removal & Installation >> Mirror Assembly >> Installation

Mirror Assembly: Installation

To install, reverse removal procedure.

Fig 1: Motor Drive Stabilizer Bars Save stabilizer bars, when replacing glass.
G09337497Courtesy of FORD MOTOR CO.
NOTE: Some "F" models may use a snap-in bezel-switch assembly. Insert screwdriver in slots at bezel edge to release retention springs. Then, disconnect wiring harness from switch, loosen set screw, and remove switch.