LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1982 >> Bronco 5.0L Eng VIN F, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Cruise Control Systems >> Testing >> Amplifier >> "COAST" Circuit Test

"COAST" Circuit Test

  1. With ignition "ON" and voltmeter connected to Light Blue/Black hash wire at amplifier 6-way connector, depress the "ON" switch and hold "COAST" button down on steering wheel.
  2. Voltmeter should indicate about 1.5 volts. If all functions check good, perform Servo Assembly Test. Insert a known good amplifier, and recheck system if necessary.
    NOTE: DO NOT substitute a new amplifier until actuator coils have been tested. See Servo Assembly Test.
    Fig 1: Wiring Diagram of Ford Automatic Speed Control System "E" model diagram illustrated.
    G09337533Courtesy of FORD MOTOR CO.