LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1982 >> Bronco 5.0L Eng VIN F, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Cruise Control Systems >> Adjustment >> Linkage Adjustment

Linkage Adjustment

  1. Adjust bead chain to obtain 0.06 - 0.25" (1.6 - 6.4 mm) actuator arm free travel when engine is at hot idle. Adjustment should be made to eliminate as much slack as possible without restricting carburetor lever from returning to idle.
  2. Cut off chain in excess of 4 beads. On vehicles equipped with solenoid anti-diesel valve, perform this adjustment with ignition switch in "OFF" position.