Removal And Installation: Installation
- In order not to compromise the functionality of the NEW
filter element, it is recommended that you protect your hands with suitable gloves during all stages of assembly.
- Fit the NEW
filter element (1a) in the lid (1b) engaging the water drain hose (1) into hole (1d) of the bleed valve.
- Check the correct position of the water presence sensor (1a) and sealing ring (1b).
- Install the filter element cover, taking care to bind the tooth with the groove of the base (1).
- Securely tighten the fuel filter cover fastening screws.
- Remove the fuel filter from the vise.
- Install the fuel filter. Refer to FILTER, FUEL, REMOVAL AND INSTALLATION .