Test FC-43B - Manifold Tune Valve Solenoid Circuit
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION . For appropriate wiring diagram, see WIRING DIAGRAMS at end of article.
- Using an external ohmmeter, check resistance between Manifold Tuning Valve (MTV) solenoid terminals. If resistance is more than 5 ohms, repair ignition 12-volt feed wire (Light Green/Black wire at MTV) for an open. Perform TEST VER-2.
- If resistance is less than 5 ohms, replace MTV solenoid and ignition 12-volt feed fuse (20-amp fuse). Perform TEST VER-2.