LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Summit L4-1468cc 1.5L SOHC >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Testing and Inspection >> Component Tests and General Diagnostics >> Sensor Inspection

Sensor Inspection


VOLTAGE TESTING PROCEDURE:

1. Connect an analog voltmeter between terminal 1 and 3 of the crank angle sensor connector.

Terminal 3: Crankshaft Position signal
Terminal 1: Sensor ground

2. Measure the output voltage of the terminals while cranking the engine.

Standard Approximate Values 1.8 - 2.5v (needle fluctuates)

3. When the voltage is abnormal, check the sensor power and ground circuits.