LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1993 >> Summit L4-1468cc 1.5L SOHC >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Full Close Switch >> Testing and Inspection >> Component Tests and General Diagnostics >> Switch Inspection

Switch Inspection

1. Disconnect the throttle position sensor connector.

Closed Throttle Position Switch Inspection:





2. Check the continuity between the throttle position sensor connector side terminal (3) and terminal (4).

Accelerator Pedal Continuity

Depressed Non-conductive (infinite ohms)
Released Conductive (zero ohms)

3. If out of specification, replace the throttle position sensor.

NOTE: After replacement, the throttle position sensor and closed throttle position switch should be adjusted.