LEMON Manuals: Even more car manuals for everyone
Home >> Eagle >> 1990 >> Talon Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Engine Cooling Fan >> Trouble Shooting & Testing Radiator Fan Relay

Trouble Shooting & Testing Radiator Fan Relay

  1. Remove radiator fan motor relay. Relay is in the relay box located in front of right strut tower. See Fig 1 . Note relay terminal identification. See Fig 2 .
  2. Connect ohmmeter to terminals No. 1 and 3. Check continuity with and without battery connected. Replace relay if continuity is not correct. See RADIATOR FAN RELAY CONTINUITY  table.
    RADIATOR FAN RELAY CONTINUITY

    Battery Connected (1) Continuity
    Yes Continuity Between No. 1 & 3 Terminals
    No No Continuity Between No. 1 & 3 Terminals
    No Continuity Between No. 2 & 4 Terminals
    (1) Positive battery terminal connected to terminal No. 2 and negative terminal connected to terminal No. 4.
    Fig 1: Locating Radiator Fan Relay
    G90B02518Courtesy of CHRYSLER MOTORS.
    Fig 2: Testing Radiator Fan Relay
    G90D02519Courtesy of CHRYSLER MOTORS.