LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2025 >> Durango R/T Plus >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling System (3.6L And 5.7L) >> Engine >> Sensor, Coolant Temperature >> Installation >> 3.6L

Sensor, Coolant Temperature: Installation: 3.6L

  1. Install the Engine Coolant Temperature (ECT) sensor (1) into the housing and turn it clockwise 1/4 turn to lock it in place.
    GC0173756Courtesy of CHRYSLER GROUP, LLC
  2. Verify that the lock tab (1) has properly engaged.
    GC0173772Courtesy of CHRYSLER GROUP, LLC
  3. Connect the wire harness connector to the ECT sensor (1).
    GC0173597Courtesy of CHRYSLER GROUP, LLC
  4. Fill the cooling system. Refer to COOLANT SYSTEM FILL AND AIR EVACUATION  .
  5. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
  6. Connect the negative battery cable.