Front Suspension And Wheel Alignment: Front: Description
The front suspension is designed to allow each wheel to adapt to different road surfaces independently. The wheels are mounted to hub bearings (not shown) on the steering knuckles (1). The hub bearings are sealed and lubricated for life. The steering knuckles (1) turn (pivot) on ball joints (5) that are pressed into the outboard portion of the upper control arms (2), and pressed into the outboard portion of the lower control arms (3), then secured to the steering knuckle (1). The ball joints (5) are lubricated for life. The upper and lower control arms (2, 3) are attached to the frame with bushings (4) that are not serviceable. The stabilizer bar (8) is attached to the lower control arms by a stabilizer bar link (6) and to the frame with stabilizer bar retaining bracket/bushings (7) that are not serviceable.