LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2025 >> Durango R/T Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Cooling System (6.2L)) >> Engine >> Sensor, Coolant Temperature >> Installation

Sensor, Coolant Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply MOPAR® thread sealant with PFTE to the Engine Coolant Temperature (ECT) sensor threads.
  2. Install the ECT sensor (1) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
    GC0170113Courtesy of CHRYSLER GROUP, LLC
  3. Connect the ECT sensor wire harness connector (2).
  4. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL .
  5. Fill the cooling system. Refer to COOLANT SYSTEM FILL AND AIR EVACUATION  .
  6. Connect the negative battery cable.