LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2025 >> Durango R/T Plus >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seats (Service Information) >> Switch, Memory >> Installation

Switch, Memory: Installation

  1. Install the memory seat switch (2) into the driver door trim panel (4), pressing the switch firmly into the trim panel until the retaining tabs (1 and 3) are fully engaged.
    GC0209879Courtesy of CHRYSLER GROUP, LLC
    GC0209878Courtesy of CHRYSLER GROUP, LLC
  2. Connect the wiring harness connector (1) to the memory seat switch (2).
  3. Install the driver door trim panel. Refer to PANEL, DOOR TRIM, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
  5. Perform the Power Seat System Verification Test. Refer to POWER SEAT SYSTEM VERIFICATION TEST .
  6. Verify the memory seat system for proper operation.