Deploy Brackets
REMOVAL
WITHOUT SLIDING SIDE DOOR
- Remove the side curtain airbag (also known as Side AirBag Inflatable Curtain/SABIC) from the vehicle. Refer to AIR BAG, REMOVAL AND INSTALLATION .
- Using a drill motor and an appropriate bit, carefully drill out the three (without sliding side door) blind rivets that secure the deploy bracket to the inside of the inner roof side rail and the B-pillar.
1 - Deploy Bracket 2 - Blind Rivets - Remove the deploy bracket from the vehicle.
| 1 - Deploy Bracket |
| 2 - Blind Rivets |
WITH SLIDING SIDE DOOR
- Remove the side curtain airbag (also known as Side AirBag Inflatable Curtain/SABIC) from the vehicle. Refer to AIR BAG, REMOVAL AND INSTALLATION .
- Using a drill motor and an appropriate bit, carefully drill out the two (with sliding side door) blind rivets that secure the deploy bracket to the inside of the inner roof side rail and the B-pillar.
- Remove the deploy bracket from the vehicle.
INSTALLATION
WITHOUT SLIDING SIDE DOOR
Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.
- Secure the deploy bracket to the inner roof side rail and the B-pillar using a blind rivet installation tool and three (without sliding side door) new blind rivets.
WITH SLIDING SIDE DOOR
Follow the removal procedure in reverse for general reassembly of the components on the vehicle. The steps listed below are calling out specific procedures that should be followed during installation.
- Secure the deploy bracket to the inner roof side rail and the B-pillar using a blind rivet installation tool and two (with sliding side door) new blind rivets.