Injector, Diesel Exhaust Fluid: Installation
- Inspect the opening of the decomposition tube and the Diesel Exhaust Fluid (DEF) injector. Make sure the opening is NOT
plugged or restricted with the build up of DEF crystals. If the decomposition tube opening or the DEF injector is plugged or restricted clean as necessary.
- Clean the gasket sealing area.
- Install a NEW
gasket (1) and clamp onto DEF dosing injector (2).
- Install the DEF injector onto Selective Catalytic Reduction (SCR) catalyst. Tighten the clamp (1) to 11 N.m (97 in. lbs.).
- Connect the DEF fluid supply line (2).
- Connect the DEF injector wire harness connector (3).
- Remove support and lower the vehicle.
- Connect the negative battery cable.