LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Durango SXT Plus, AWD >> Repair and Diagnosis >> Transmission >> Mp2010 Transfer Case (Service Information) >> Installation

Mp2010 Transfer Case (Service Information): Installation

GC0146208Courtesy of CHRYSLER GROUP, LLC
  1. Mount transfer case on a transmission jack.
  2. Secure transfer case to jack with chains.
  3. Position transfer case under vehicle.
  4. Align transfer case and transmission (1) shafts and install transfer case onto the transmission.
  5. Install and tighten all transfer case attaching bolts (2) to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
  6. Connect front propeller shaft and install rear propeller shaft. Refer to SHAFT, DRIVE, REAR, INSTALLATION .
    GC0146196Courtesy of CHRYSLER GROUP, LLC
  7. Remove transfer case fill plug (2).
  8. Fill transfer case with correct fluid. Refer to STANDARD PROCEDURE - FLUID DRAIN/REFILL  .
  9. Install the transfer case fill plug (2) and tighten the plug to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
  10. Install rear crossmember and skid plate, if equipped. Tighten crossmember bolts to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
  11. Remove transmission jack and support stand.
  12. Lower vehicle and verify transfer case operation.