Air Bag, Passenger: Description
The horizontal surface of the instrument panel top pad (1) above the glove box (2) is the most visible part of the Passenger Airbag (PAB). The PAB door is integral to the top of the instrument panel top pad forward of and above the glove box on the instrument panel in front of the front seat passenger seating position.
Located below the PAB door area of the instrument panel top pad, the molded thermoplastic PAB retainer or chute is secured to the underside of the top pad. The retainer defines the PAB door breakout area of the top pad and serves as the receptacle for the PAB cushion and housing.
Three small window openings on the forward and rearward flanges of the receptacle receive mating hook formations of the airbag housing, which locate and secure the housing to the top pad. The center window in the rearward flange of the receptacle and the center hook on the rearward side of the housing have a reduced width to ensure the that the PAB cannot be incorrectly oriented during installation.
The PAB unit is also secured by a stamped metal mounting bracket (3) and two screws to the instrument panel structural support. The PAB unit used in this vehicle is a multistage type that complies with revised federal airbag standards to deploy with less force than those used in some prior vehicles. The PAB unit consists of a housing (1), the airbag cushion (2) and the two-stage airbag inflator (4). The PAB inflator, the mounting bracket and the airbag cushion retainer are secured to the housing by four studs and four nuts. The airbag housing contains the folded airbag cushion, the inflator diffuser and the cushion retainer. A rectangular fabric cushion is used.
The PAB inflator is a non-azide, pyrotechnic-type unit that is secured to and sealed within the airbag housing. A dedicated take out and connectors of the instrument panel wire harness with keyed, color-coded insulators connects the two inflator initiators to the vehicle electrical system and are secured to a tab on the outboard side of the PAB mounting bracket.
The PAB cannot be repaired, and must be replaced if deployed, ineffective or in any way damaged. The PAB door and chute or retainer are serviced only as a unit with the instrument panel top pad. If the PAB is deployed, the top pad must also be replaced.