LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Challenger SXT >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Sensor, Air Temperature, Inlet >> Installation >> 5.7L

Sensor, Air Temperature, Inlet: Installation: 5.7L

GC0080466Courtesy of CHRYSLER GROUP, LLC
  1. Install Inlet Air Temperature (IAT) sensor into rubber air hose.
  2. Rotate sensor into position as shown in the illustration. For proper system operation, sensor must be positioned as shown in the illustration. 
    GC0080461Courtesy of CHRYSLER GROUP, LLC
  3. Connect IAT sensor wire harness connector.
  4. Install the engine cover.
  5. Connect the negative battery cable.