LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2016 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Frame And Bumpers) >> Frame >> Specifications >> Specifications

Section 10 (Frame And Bumpers): Frame: Specifications: Specifications

WARNING: This page is about a different car, the 2014 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Frame dimensions are listed in metric scale. All dimensions are from center to center of Principal Locating Point (PLP), or from center to center of PLP and fastener location.

VEHICLE PREPARATION 

Position the vehicle on a level work surface. Using screw or bottle jacks, adjust the vehicle PLP heights to the specified dimension above a level work surface. Vertical dimensions can be taken from the work surface to the locations indicated were applicable.

INDEX

DESCRIPTION FIGURE
Under Body Dimensions Refer to Fig 1.
Under Hood (Quick Reference) Refer to Fig 2.
Under Hood Refer to Fig 3.
Fig 1: Underbody Dimensions
GC0146395Courtesy of CHRYSLER GROUP, LLC
Fig 2: Under Hood Quick Reference
GC0146278Courtesy of CHRYSLER GROUP, LLC
Fig 3: Under Hood
GC0146205Courtesy of CHRYSLER GROUP, LLC