LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2014 >> Durango SXT, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension & Wheel Alignment >> Wheel Alignment >> Specifications >> Wheel Alignment

Wheel Alignment

NOTE:

Specifications are in degrees. 

FRONT ALIGNMENT SPECIFICATIONS

Front Alignment Specifications
  Total Toe(1) Caster Cross Caster Left Camber Right Camber Cross Camber
Base Suspension  0.20° +/- 0.13° 5.00° +/- 0.60° 0.00° +/- 1.00° -0.12° +/- 0.60° -0.62° +/- 0.60° 0.50° +/- 0.60°
Aero Suspension and Sport Suspension  0.20° +/- 0.13° 5.45° +/- 0.60° 0.00° +/- 1.00° -0.60° +/- 0.60° -1.10° +/- 0.60° 0.50° +/- 0.60°
NOTE: Positive toe (+) is toe-in and negative toe (-) is Toe-out.
(1) TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe.
REAR ALIGNMENT SPECIFICATIONS

Rear Alignment Specifications
  Toe Total Toe(1) Thrust Angle Camber Cross Camber
Base Suspension  0.10° +/- 0.15° 0.20° +/- 0.30° 0.00° +/- 0.15° -0.54° +/- 0.55° 0.00° +/- 0.60°
Aero Suspension and Sport Suspension  0.10° +/- 0.15° 0.20° +/- 0.30° 0.00° +/- 0.15° -1.02° +/- 0.55° 0.00° +/- 0.60°
NOTE: Positive toe (+) is toe-in and negative toe (-) is Toe-out.
(1) TOTAL TOE is the sum of both the left and right wheel toe settings. TOTAL TOE should be equally split between each wheel on the same axle to ensure the steering wheel is centered after setting toe.