LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Durango R/T, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 545RFE Automatic Transmission (Service Information) >> Sensor, Variable Line Pressure >> Removal >> Removal

Sensor, Variable Line Pressure: Removal: Removal

Fig 1: Installing Input Speed Sensor
GC0082969Courtesy of CHRYSLER LLC
1 - OUTPUT SPEED SENSOR
2 - LINE PRESSURE SENSOR
3 - INPUT SPEED SENSOR
  1. Raise vehicle.
  2. Place a suitable fluid catch pan under the transmission.
  3. Remove the wiring connector from the line pressure sensor (2). Refer to Fig 1.
  4. Remove the bolt holding the line pressure sensor (2) to the transmission case.
  5. Remove the line pressure sensor (2) from the transmission case.