LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Fuel System) >> Fuel Injection >> Throttle Body >> Removal >> 4.7L

Throttle Body: Removal: 4.7L

WARNING: This page is about a different car, the 2011 RAM Dakota. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Using a diagnostic scan tool, record any previous DTC's (Diagnostic Trouble Codes).

CAUTION:

Never have the ignition key in the ON position when checking the throttle body shaft for a binding condition. This may set DTC's.

Fig 1: Identifying Throttle Body-4.7l
GC0082930Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable at battery.
  2. Remove air duct and air resonator box at throttle body (3).
  3. Disconnect throttle body electrical connector (2).
  4. Disconnect necessary vacuum lines at throttle body.
  5. Remove four throttle body mounting bolts (1).
  6. Remove throttle body from intake manifold.
  7. Check condition of old throttle body-to-intake manifold o-ring.