LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Fuel System) >> Fuel Injection >> SENSOR, Air Temperature, Intake >> Removal >> 3.7L

SENSOR, Air Temperature, Intake: Removal: 3.7L

WARNING: This page is about a different car, the 2011 RAM Dakota. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: IAT Sensor Location - 3.7L
GC0083613Courtesy of CHRYSLER LLC

The intake manifold air temperature (IAT) sensor (1) is installed into the air intake tube near the throttle body (2).

  1. Disconnect electrical connector (1) from IAT sensor.
  2. Clean dirt from intake tube at sensor base.
    Fig 2: View Of IAT Sensor Tab/O-ring - 3.7L/4.7L/5.7L
    GC0082921Courtesy of CHRYSLER LLC
    1 - IAT SENSOR
    2 - SENSOR O-RING
    3 - RELEASE TAB
  3. Gently lift on small plastic release tab (3) and rotate sensor about 1/4 turn counter-clockwise for removal.
  4. Check condition of sensor o-ring (2).