LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Fuel System) >> Fuel Delivery >> TANK, Fuel >> Removal >> Removal

TANK, Fuel: Removal: Removal

WARNING: This page is about a different car, the 2011 RAM Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel system pressure. Refer to Fuel Delivery, Standard Procedure .
  2. Drain fuel tank. Refer to Fuel Delivery, Standard Procedure .
    Fig 1: Identifying Fuel Tank Components - Extended CAB
    GC0112623Courtesy of CHRYSLER LLC
    Fig 2: Identifying Fuel Tank Components - Double CAB
    GC0112624Courtesy of CHRYSLER LLC
  3. Disconnect vent line (3) from tank.
  4. Remove clamp (7) and disconnect fill hose (6) at fuel fill tube.
  5. If equipped, remove fuel tank skid plate.
  6. Disconnect electrical connector at ESIM switch (9).
  7. Disconnect ESIM, ORVR and EVAP lines at front of tank.
    Fig 3: Fuel Tank Mounting
    GC0112625Courtesy of CHRYSLER LLC
  8. Support tank with a hydraulic jack.
  9. Remove two fuel tank strap nuts (3) and remove both tank support straps (2).
  10. Carefully lower tank a few inches and disconnect fuel pump module electrical connector at top of tank. To disconnect electrical connector: Push upward on red colored tab to unlock. Push on black colored tab while removing connector.
  11. Disconnect fuel line at fuel pump module fitting by pressing on tabs at side of quick-connect fitting.
  12. Continue to lower tank for removal.
  13. If fuel tank is to be replaced, remove fuel pump module from tank. Refer to MODULE, Fuel Pump, Removal .