LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Durango R/T, AWD >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Tailpipe, Exhaust >> Installation >> 3.6/5.7L Engine

3.6/5.7L Engine

NOTE:

Muffler installation is a two-man operation. Never allow the muffler to hang from the isolators. A helper is required so no damage will come to the isolators or to the tailpipe/muffler assembly.

Fig 1: Tailpipe/Muffler Assembly & Isolators
GC0145892Courtesy of CHRYSLER LLC
  1. Position the tailpipe/resonator/muffler (3) assembly in vehicle.
  2. Install tailpipe/resonator insulators (2).
    Fig 2: Muffler Flange
    GC0138689Courtesy of CHRYSLER LLC
  3. Install muffler insulators (4) and ground straps (3)
  4. Align muffler (1) to the catalytic convertor pipe flange. Install and Tighten flange (2) nuts to 47 N.m (35 ft. lbs.).
  5. Make sure the tailpipe/resonator assembly is correctly positioned and the properly aligned. The minimum clearance between components is 25mm (1 inch).
  6. Lower the vehicle.
  7. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.