LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Challenger Rallye >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Restraints System (Service Information) >> Sensor, Impact >> Removal >> Removal >> Front Impact Sensor

Front Impact Sensor

Fig 1: Front Impact Sensor Location
GC0080222Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
    WARNING:

    Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, which may result in serious or fatal injury.

    NOTE:

    If replacing the left front impact sensor, the air intake system needs to be removed.

  2. Disconnect the front impact sensor electrical connector (3).
  3. Remove the two front impact sensor retaining screws (2).
  4. Remove the impact sensor.