LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2011 >> Challenger Rallye >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Door >> Removal >> Removal

Module, Door: Removal: Removal

Fig 1: Removing/Installing Door Wire Harness Connectors
GC0139344Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the trim panel from the inside of the front door. Refer to PANEL, DOOR TRIM, REMOVAL .
  3. Disconnect the door wire harness connectors (2) from the door control module (1) connector receptacles.
  4. Remove the screws (3) that secure the door control module to the door inner panel.
  5. Remove the door control module from the door inner panel.