LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> SRT-4 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection >> Fuel Injector >> Standard Procedure >> Removal - Injector Connector

Removal - Injector Connector

  1. Disconnect electrical connectors at the fuel injectors (Fig 1). To remove connector refer to Fig 2. Pull the red colored slider away from injector (1). While pulling the slider, depress tab (2) and remove connector (3) from injector. The factory fuel injection wiring harness is numerically tagged (INJ 1, INJ 2, etc.) for injector position identification. If harness is not tagged, make note of wiring location before removal.
    Fig 1: Disconnecting Electrical Connectors At Fuel Injector
    G03538370Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Removing/Installing Injector Connector
    G03538371Courtesy of DAIMLERCHRYSLER CORP.