LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> Neon SE, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Removal & Installation >> Output Speed Sensor >> Installation

Output Speed Sensor: Installation

  1. Verify "O" ring is installed into position. See Figure.
  2. Install and tighten input speed sensor to 20 ft. lbs. (27 N.m).
  3. Connect speed sensor connector. See Fig 1.
  4. Connect battery negative cable.
Fig 1: Disconnecting Speed Sensor Connectors
G00368184Courtesy of CHRYSLER CORP.
Fig 2: Removing Output Speed Sensor
G00368185Courtesy of CHRYSLER CORP.