LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> Neon SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Ignition Control) >> Knock Sensor >> Installation >> Installation - 2.0L

Installation - 2.0L

WARNING: This page is about a different car, the 2004 Dodge SRT-4. However, it is still accessible from the selected car via links, so may be relevant.

The knock sensor bolts into the side of the cylinder block in front of the starter.

  1. Install knock sensor. Tighten knock sensor bolt to 22 N.m (195 in. lbs.) torque. Over or under tightening effects knock sensor performance, possibly causing improper spark control. 
  2. Attach electrical connector to knock sensor.