LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2004 >> Neon SE, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection >> Manifold Tune Valve >> Installation

Manifold Tune Valve: Installation

  1. Connect the electrical connector to the MTV and bracket (Figure).
    NOTE: When removing the MTV do not loose the spring that is between the valve and intake manifold.
  2. Install the MTV. Align the slot in the valve with the tab on the intake manifold. Do not forget to install the spring.
  3. Install the 2 bolts to the MTV (Figure).
  4. Install the bracket (Figure).
  5. Install the 3 bolts for the rear power steering bracket.
  6. Untie the upper radiator hose.
  7. Connect the negative battery cable.