Trim Panel: Installation
- Replace any damaged or missing push in fasteners from around perimeter of door trim panel.
- Place trim panel near door.
- Connect wire connector into power door lock switch, mirror switch, and power window switch, if so equipped.
- Insert latch rod into handle and engage clip.
- Install trim panel into retainer channel at top of door and push down to seat.
- Locate door trim panel to inner door panel by aligning locating pins on backside of trim panel to mating holes in inner door panel.
- Install push in fasteners to hold trim to door panel around perimeter of trim panel.
- Install screw inside latch release handle.
- Install screw inside arm rest pull cup.
- With the window in the down position, orientate the window regulator crank handle appropriately. Install the right handle at the 10 o'clock position and the left handle at the 2 O'clock position, if so equipped.