LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Ram Van B2500, Van Cargo, 5.9 Z >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Engine Component Tests - Gasoline >> Verification Tests >> Test VER-1: Powertrain Verification

Test VER-1: Powertrain Verification

NOTE: If Powertrain Control Module (PCM) is replaced, the correct vehicle mileage and Vehicle Identification Number (VIN) must be programmed into the PCM to prevent Diagnostic Trouble Codes (DTC) from being stored Controller Anti-Lock Brake (CAB) module and Air Bag Control Module (ACM). To program PCM and clear DTCs from CAB and ACM modules, see PROGRAMMING 

Inspect vehicle to ensure all components related to repair are properly connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change engine oil and filter as necessary. Attempt to start engine. If engine starts and stays running, test is complete. If engine does not start, or starts and stalls, check for related technical service bulletins. See NO-START DIAGNOSIS or DRIVEABILITY PROBLEMS in BASIC DIAGNOSTIC PROCEDURES - RAM PICKUP, RAM VAN & RAM WAGON - GASOLINE article for additional testing.