LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2002 >> Ram Van B2500, Van Cargo, 5.9 Z >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Air Bag Control Module >> Removal

Air Bag Control Module: Removal

  1. Turn ignition off. Disconnect negative battery cable and wait 2 minutes. Reach under front of driver's side seat to access and remove molded plastic Air Bag Control Module (ACM) cover. ACM cover is secured to floor panel with double-faced foam tape. Discard ACM cover.
  2. Disconnect ACM connector. To disconnect ACM connector, remove Red Connector Position Assurance (CPA) lock from connector by sliding it toward front of vehicle. Depress connector latch tab and pull connector straight, away from ACM connector receptacle.
  3. Remove 3 ACM mounting screws that secure ACM to mount. Remove ACM and mounting bracket from vehicle.
scientia non olet · About LEMON Manuals