LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2000 >> Durango 4.7 N, Part Time >> Repair and Diagnosis >> Electrical >> Fuses & Circuit Breakers >> Identification >> Relay & Fuse Block

Relay & Fuse Block

CAUTION: When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.

The relay/fuse block is located behind the end cover at the left side of the instrument panel. See Fig 1 . Pull the cover straight away from the instrument panel for access to the fuses. The location and identification of the relay/fuse block fuses and relays can be found on the inside of the instrument panel end cover. See Fig 2 and Fig 3 .

Fig 1: Locating Relay & Fuse Block
G00154969Courtesy of CHRYSLER CORP.
Fig 2: Identifying Relay & Fuse Block
G00154990Courtesy of CHRYSLER CORP.
Fig 3: Identifying Relay & Fuse Block Legend
G00154991Courtesy of CHRYSLER CORP.