LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1993 >> Ram 50 SE, Standard >> Labor Times >> Other Variant >> Transmission >> Manual Trans >> Transmission Assembly >> Remove, Install, and Overhaul

Transmission Assembly: Remove, Install, and Overhaul

WARNING: This page is about the Ram 50 Base, 2D Pickup, 2.4 G, 4WD, which is a different variant/trim than selected.
Applies ToNoteStandard HoursWarranty HoursSkill Level
5 Spd Trans,4WD,In-Line410.6A
Additional Procedure: TRANSMISSION ASSEMBLY: Remove, Install, and Overhaul:
Where Skid Plate interferes add0.40.4A
Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace:
0.9C
Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace:
0.6C
Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace:
0.2C
Combination Procedure: FLYWHEEL: Remove & Replace:
0.9C