LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 1981 >> Cutaway >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Electronic Ignition >> Testing >> Dual Pick-Up Start-Run Relay (If Equipped)

Dual Pick-Up Start-Run Relay (If Equipped)

  1. Turn ignition switch "OFF". Remove 2-wire connector from dual pick-up start-run relay terminals 4 and 5. Using an ohmmeter, connect leads to terminals 4 and 5 of start-run relay. See Fig 1.
  2. Resistance reading should be 20-30 ohms. If not to specifications, replace dual pick-up start-run relay.
    Fig 1: Dual Pick-Up Start-Run Relay Terminal Locations
    G09337337Courtesy of CHRYSLER GROUP, LLC