Timing Chain
- Rotate crankshaft until No. 1 cylinder is at TDC. If engine is removed, invert cylinder block and install timing chain guide with oil jet toward chain and sprocket meshing point.
- With mating marks of crankshaft sprocket and camshaft sprocket aligned with plated links of chain, install sprocket onto crankshaft with chain fitted in guide groove against tensioner lever (see Fig 1).
- Install Woodruff key, then install crankshaft gear with "F" mark and oil slinger concave side facing forward. Install gasket and front cover. Insert tensioner lever plunger through hole in right side of cover. Tighten plunger holder.
Courtesy of CHRYSLER GROUP, LLC