LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Sensor, Crankshaft Position >> Installation >> 2.4L

Sensor, Crankshaft Position: Installation: 2.4L

Fig 1: View Of Crankshaft Position Sensor
GC0122160Courtesy of CHRYSLER LLC
  1. Check the O-ring for damage and lubricate the O-ring with engine oil before installing the sensor.
  2. Use a twisting motion when installing the sensor.
    Fig 2: Crankshaft Position Sensor
    GC0082498Courtesy of CHRYSLER LLC
  3. Install and tighten the crankshaft position sensor bolt to 9 N.m (79.5 in. lbs.).
    Fig 3: Sensor Location
    GC0082497Courtesy of CHRYSLER LLC
  4. Connect and lock the electrical connector to the crankshaft position sensor.
  5. Install the heat shield and retaining bolt.
  6. Lower the vehicle.
  7. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).