LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Gas >> Injector(S), Fuel >> Installation >> 2.4L

Injector(S), Fuel: Installation: 2.4L

Fig 1: Fuel Injector And Rail
GC0082493Courtesy of CHRYSLER LLC
  1. Apply a light coating of clean engine oil to the upper O-ring.
  2. Install the injector into the cup on the fuel rail.
  3. Install the retaining clip.
    Fig 2: Rail Removal/Install
    GC0082491Courtesy of CHRYSLER LLC
  4. Apply a light coating of clean engine oil to the O-ring on the nozzle end of each injector.
  5. Insert the fuel injector nozzles into openings in the lower intake manifold. Seat the injectors in place.
    Fig 3: Electrical Harness Removed
    GC0082490Courtesy of CHRYSLER LLC
  6. Tighten the fuel rail mounting screws to 27 N.m (20 ft. lbs.).
    Fig 4: Harness Clips
    GC0082489Courtesy of CHRYSLER LLC
  7. Install the wiring harness clips to the fuel rail mounting studs.
    Fig 5: Electrical Connectors
    GC0082488Courtesy of CHRYSLER LLC
  8. Connect the electrical connectors to the fuel injectors.
    Fig 6: Fuel Line AT Rail
    GC0082487Courtesy of CHRYSLER LLC
  9. Connect the fuel supply tube to the fuel rail.
  10. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
  11. Use the scan tool to pressurize the fuel system. Check for leaks.