LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair >> Ignition Coil - Removal

Ignition Coil - Removal







2.7L

1. Disconnect negative battery cable.
2. Prior to removing the ignition coils, spray compressed air around the coil area and spark plug.
3. Remove upper intake manifold, Intake Manifold - Removal.
4. Disconnect the electrical connector coils.
5. Remove fastener from each ignition coil assembly.
6. Twist coil assembly.
7. Lift and remove from vehicle.