LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Sedan V6-3.5L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Pump >> Service and Repair >> Installation

Installation






INSTALLATION

NOTE: A new grommet is required for installation of a new or reused washer pump motor.

1. Firmly grasping pump by hand twist and push into reservoir. Care must be taken not to tear grommet or puncture reservoir.

2. If fascia was partially removed, reinstall bumper fascia as needed.

3. Refill reservoir with the washer solvent.

4. Connect the battery negative remote cable.