LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Sedan V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Tube >> Service and Repair >> Installation

Installation






3.5L




1. Clean mounting surface.

2. Inspect rubber silicone seals on intake manifold end of EGR tube.

3. Install upper tube into the intake manifold, being careful that the silicone rubber seals are correctly installed and undamaged.

4. Install new gasket between the EGR valve and tube and install bolts (2).

5. Tighten the upper tube to EGR valve bolts to 11 Nm (95 in. lbs.) torque.