LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Sedan V6-3.5L >> Repair and Diagnosis >> Lighting and Horns >> Fog/Driving Lamp >> Service and Repair >> Installation

Installation






LAMP UNIT





1. Place fog lamp (2) into position.

2. Connect wire connector (3) to fog lamp bulb.

3. Install fog lamp (2) to fascia.

4. Install two screws (1) attaching fog lamp (2) to front bumper fascia.

5. Install the front lower fascia closeout panel.

6. Connect battery negative cable.