LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Sebring Sedan V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Front Cross-Member >> Service and Repair >> Front Crossmember Fore/Aft >> Removal

Removal






REMOVAL
1. Raise and support the vehicle.





2. If equipped, remove the two front crossmember bolts (1).





3. Remove the rear four crossmember bolts (1).





4. Remove the engine roll mount (2) through bolt (1) and remove the fore/aft crossmember (3).