LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Aspen 2WD V8-5.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Parking Assist Control Module >> Service and Repair >> Installation

Installation






INSTALLATION





1. Position the park assist module (5) to the left quarter inner panel, behind the power liftgate module (3) to the rear of the C-pillar (2) and above the left rear wheel housing.

2. Secure the module to the left quarter inner panel using three plastic push-in fasteners (4).

3. Reconnect the two body wire harness connectors (1) to the module connector receptacles.

4. Reinstall the trim onto the left quarter inner panel.

5. Reconnect the battery negative cable.