LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Aspen 2WD V8-5.7L >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Control Solenoid >> Service and Repair >> Removal

Removal






REMOVAL





The electronic EGR valve and solenoid assembly (3) is attached to the front of the right cylinder head (1). An exhaust gas routing tube connects the EGR valve to the intake manifold.




1. Disconnect electrical connector (1) from EGR solenoid (2).

2. Remove two bolts (3) connecting EGR tube (4) to valve assembly.

3. Remove gasket located between EGR tube flange and EGR valve assembly.




4. Remove two mounting bolts (2).

5. Separate valve assembly (3) from cylinder head (1).

6. Remove and discard metal gasket located between cylinder head and valve assembly.