LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2007 >> Aspen 2WD V8-5.7L >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Installation - Front

Installation - Front






INSTALLATION





1. Position the blower motor and blower wheel assembly (2) into the HVAC housing (4).

2. Install the three screws (3) that secure the blower motor and blower wheel assembly to the HVAC housing. Tighten the screws to 2.2 Nm (20 in. lbs.).

3. Connect the wire harness connector (1) to the blower motor.

4. Install the right cowl side trim panel.

5. Install the right front door scuff plate.

6. Reconnect the negative battery cable.